Water Damage Restoration Requires Preparation Plus Knowledge

Water damage refers to different potential losses incurred by water flowing in where it may enable an attack of some destructive processes like rotting of timber, the growth of mould, bacteria expansion, rusting of metal, swelling of metals like steel, de-lamination of metals like iron, and others. This may cause extensive structural damage to the building or may result in personal injury or even death. Water damage is of many kinds. Some of them are listed below. This article mainly discusses the most common types of water damage.

Leak – A major kind of water damage restoration is leakage. When a pipe or other plumbing system experiences any kind of leak, the water can flow out and can reach even ceilings, walls and floors. If this is not repaired as soon as possible, you will have to spend a lot of repairing the damage.

Water mitigation – This is another common cause of water mitigation. In this case, there may be visible water leakages on walls, floors, ceilings, doors, windows, etc. This can result in weakening of the structure of the building and can also result in severe structural damages.

Drying – A drying process is one of the most difficult ones for a restoration worker. In order to remove water from the surface as quickly as possible, professional help is needed. There are two main ways to remove water from a surface quickly, which include standing water extraction and wet & dry cleaning. You should be very careful while removing the standing water as visible mold and mildew might grow if the cleaning process is not completed properly.

Repair – A restoration job is not complete until all the damaged parts are removed from the affected structure. The removal of parts plays an important role in the speed of the entire restoration job. For example, if there are several windows that need to be repaired, the entire window should not be left out during the repair.

Drying – Another important thing to consider while doing a damage repair is to dry the area out. The moisture content in the area needs to be kept to a minimum, so the air will not be saturated. The first step in the damage restoration process is to dry out the space completely. This can be done by opening all windows and doors. Also, using fans and dehumidifiers can speed up the drying process.

Sanitizing – The third and last important step in damage restoration is the sanitizing of the area. There might be a need to use disinfectants or antimicrobials while cleaning or dealing with the water removal problem. Professional water removal companies do this type of cleaning regularly. So, before you do the damage restoration, it would be wise to inquire about sanitizing options available. There are several options and products that can be used for sanitizing.

Dehumidifiers – Some restoration companies may also use dehumidifiers in order to make the space much cooler during the cleaning process. During this process, any water that has gotten into the structure will be pulled out through the vents. Also, any moisture that is within the building will be dried out as well. Finally, the space will be sprayed with a sanitizer to kill any lingering bacteria. Dehumidifiers are an effective way of sanitizing the space and keeping it fresh and clean.

Pipes – Depending on the type of water cleanup that needs to be done, the pipes will need to be repaired or replaced. This might include sewage treatment, storm water disposal or sanitizing the pipes. Sometimes both these tasks will have to be done at once. If the pipes are not too badly damaged, they can usually be replaced with new ones without hiring a professional repair company.

Walls – One more aspect of damage repair that many water restoration companies will take care of is the wall surface cleanup. If a section of the wall has sunk or torn, the rest of the wall will be able to be salvaged without hiring a professional company. This is especially true if the rest of the house has not been affected. However, walls should always be fixed and replaced if at all possible because they can be another weak point in the home that could allow moisture to enter.

Plumbing – Sometimes there will be nothing wrong with the plumbing, but it needs to be checked out as well. For example, if someone accidentally turned off the hot water tap while the hot water was running, this is a possible indication of a pipe leak. Other times, pipes may simply burst from excessive use. A qualified plumber should be called out to investigate any plumbing problems in your home as soon as possible. Grand Rapids MI Water damage cleanup typically involves having pipes repaired or replaced.

Leave a Reply

Your email address will not be published. Required fields are marked *